Posts Tagged ‘Belcarra’

What Are Your Heat Pump Options?

Wednesday, April 6th, 2011

Once you’ve decided that a heat pump really is the best option for your home, you’ll still have a lot of options to consider. There are actually quite a few types of heat pumps and they can vary considerably in terms of their energy efficiency and other available features.

For instance, you can choose to go with a heat pump with a one-speed, two-speed or multi-speed compressor. Single speed compressors are only capable of operating at full capacity. That means that they’ll certainly be able to keep your home warm, but they may be working harder than they need to at some points.

A two-speed or multi-speed compressor, on the other hand, can be adjusted to more appropriately fit the heating and cooling needs of the moment. There will certainly be times when you don’t need your heat pump to be going all out, and the ability to regulate this level of performance can benefit you in several ways.

It will allow you to maintain a more consistent indoor temperature to be sure, but it will also reduce the overall wear and tear on your heat pump over time. If your heat pump doesn’t have to run all out all of the time, it simply won’t wear out as fast, and that will save you both money and frustration in the long run. It’s also worth noting that heat pumps with two-speed or multi-speed compressors are more easily integrated into a zone control system if you have one in your home.

However, regardless of what type of compressor your heat pump has, you’ll also have to examine the various heat pump models available to determine what their actual energy efficiency ratings are. Each heat pump actually comes with two ratings, one for heating and one for cooling.

The heating season performance factor (HSPF) reflects the heat pump’s heating efficiency, while the seasonal energy efficiency ratio (SEER) is a measure of its cooling efficiency. The higher both of these numbers are, the higher the efficiency of the unit. But you don’t necessarily need both numbers to be as high as possible to get the best heat pump for your home.

If you’re going to be using the heat pump more for cooling than for heating because of the climate where you live, you’ll want to make sure the unit you get has as high a SEER as possible, but you won’t have to worry too much about the HSPF. But if you’re going to need more heating than cooling, you should pay more attention to the HSPF than the SEER.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Is a Heat Pump Right for Your Home?

Tuesday, February 22nd, 2011

Deciding which type of home comfort system to go with can be a difficult process to navigate. There are a ton of factors to take into account including how much you will be using the system, what type of fuel you mainly rely on and what the specific climate is like where you live.

Heat pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

Below that, you may need to install some type of supplemental heating in order to keep your home warm enough on those really cold days. So if you live in an area where temperatures routinely dip below freezing for large portions of the winter, a heat pump might not be the most sensible solution for you.

Tags: , , , , , ,
Posted in Heat Pumps | 1 Comment »

How Efficient Is a Heat Pump?

Thursday, January 6th, 2011

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for.

Tags: , , , ,
Posted in Heat Pumps | 2 Comments »