Posts Tagged ‘Popkum’

How to Use a Plumber’s Snake: A Tip From Popkum

Friday, September 9th, 2011

Your kitchen sink in your Popkum home is backed up and you can’t prepare dinner. Or your toilet is plugged and even the plunger isn’t fixing the problem. It may be time to call for the snake – plumber’s snake that is.

For those of you who are intimidated by tools, take note: you have nothing to fear from the snake. It is easy to operate and is an option to try before calling for a professional plumbing repair.

Okay, so you’ve decided to use a snake to unclog your pipe. Do you have one? If you rarely use a snake in your home you might want to consider renting one. Most tool rental shops have snakes in varying sizes for rent – from hand-held to electric. But it is a good idea to have one around for emergencies and you can find hand-held snakes for under $10 (often named “augers”).

The first thing you need to do is prep for the job. Make sure you have cleared out an area to work on the plumbing and that you have plenty of rags to mop up any spills or drips. It is a good idea to lay down some newspaper or plastic to keep the floor and cabinets dry, too.

Make sure you have access to the pipe by removing any drain covering. Obviously you will have directly access to the toilet drain. Before operating the snake you should put on a pair of rubber gloves to protect your hands from the metal coils of the snake and any debris that might be in the pipe.

Next, slowly feed the snake into the pipe. You may have to turn the snake in a clockwise direction to move it along. Once you have reached the clog – and you can usually tell when the snake stops feeding – it is time to rotate the snake into the clog and loosen it up. The head or tip of snake should be able to grab on the debris so that you can pull it back out and dispose of it. In the process, some of the debris may wash away down the pipe and that’s okay (well, as long as it doesn’t accumulate further down the circuit). You really want to use the snake head to “chew up” the debris for removal, rather than just pushing it further down the pipe.

Once you have removed the debris clogging the pipe, run hot water down the pipes to wash away any remnants. Replace the drain cover if necessary and clean up your mess. Voila!

If you have a stubborn clog that won’t snake out or if you just aren’t comfortable using a tool, call a professional plumber to save you the effort.

Tags: , , , ,
Posted in Plumbing | Comments Off

Allergens: Regular Duct Cleaning Will Reduce Them

Friday, June 24th, 2011

One of the biggest problems many families face with indoor air quality is the ever persistent presence of allergens. Especially if you have pets or plants, allergens will be in your home from the day you move in. But, that doesn’t mean there aren’t many ways to reduce them – especially in the case of duct work.

Allergens in Your Duct Work

How do so many allergens get into your ductwork? It starts with how the ductwork circulates air in your home. Because air only flows one way and because the ducts are not being used continuously, the air circulated by your air conditioner or furnace leaves behind all sorts of unwanted residue.

In both cases, the air drawn into your comfort system is usually the same air from inside your home. That means it is full of things like dust, pollen, dander and more. Even if the air is drawn from outside, often the case with an air conditioner unit, there are plenty of allergens outside.

How do you stop all of these allergens from working their way into your home and then your lungs? It starts with regular cleaning. You can’t ever truly stop allergens from coming inside or circulating in your air ducts, but you can take big steps in removing many of the contaminants that linger in your ducts.

Annual cleaning of the ducts by a professional will remove excess build up in places you cannot normally reach. Between those cleaning visits, you should supplement the cleaning by dusting and vacuuming vents and the areas of your ducts you can reach.

Going Beyond Cleaning

Cleaning your ducts is a great way to reduce allergens in the house. That alone, along with quality ventilation will take care of the most common allergens. However, if people in your home suffer from asthma or more severe seasonal allergies you may want to upgrade your preventative measures with an air filtration and purification system.

An air filter alone, equipped with a HEPA filter, is capable of removing particles and allergens as small as 0.3 microns – far smaller than dander, pollen or dust. For those with more advanced allergies or too many outdoor contaminants, a purifier works wonders by removing excess gas, smoke, or mold from the air with ionization.

Whatever your concerns, it is possible to live comfortably in your home despite allergies. Stay on top of cleaning and get your air tested to see if filtration will help. From there, you can remove almost anything.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How Can I Prevent Clogged Drains?

Wednesday, June 8th, 2011

One of the most frustrating plumbing issues any home owner will encounter is a clogged drain. Not only are clogged drains a nuisance, they are largely avoidable, so it becomes that much more frustrating when it happens since you know that you could have taken preventative measures long before the problem occurred. To help stop your drains from clogging in the future, here are some useful preventative tips:

  • Set Cooking Grease Aside – Cooking grease is thick, viscous and clings to the sides of almost all types of pipes. So, instead of pouring it down your sink and hoping it clears out on its own, pour it into a coffee can and set it aside. There are a number of places where you can recycle old grease.
  • Flush Garbage Disposals – When you use your garbage disposal, it is imperative that you flush cold water through the system at the same time. Without water to flush the food particles through the pipes, anything ground up in the disposal will become stuck and with the application of grease or other food particles can easily become a thick clog.
  • Pour Boiling Hot Water Down the Pipes – At least once a week it is a good idea to pour 2-3 quarts of boiling water down your sinks and bathtub to loosen any pre-clogs that have formed. Things like soap, grease, food, and hair can all be dislodged by an application of hot water on a regular basis.
  • Taking Care with Your Toilet – A toilet is not designed to flush anything that will technically fit down the hole. Even for paper products that seem to be flushable, take care in what goes into the toilet bowl. Paper towels, garbage, and wrappers should not be flushed or they are likely to cause clogs.
  • Use Strainers – Install strainers on all of your sinks, including the ones in your bathroom. A simple strainer will catch excess bits of food, hair, and other grime that has a habit of falling down the drain and getting flushed along with the dishwater or during a shower.

With care, your drains will remain clog free and never require the services of a snake or a plumber. If you do get past the point of no return, do not panic just yet – there are a number of steps you can take to remove a small clog without chemicals or professional help. However, if the clog refuses to budge or begins to backup, know when to call a plumber.

Tags: , , , ,
Posted in Plumbing | Comments Off

Is it Possible to Vent Hot Air from a Garage?

Wednesday, May 4th, 2011

If you have a garage, you know how hot it can get in there on a warm summer day. In fact, the air in your garage is likely hotter and more humid than the air right outside. Of course, you may not spend a lot of time in your garage, so reducing the temperature in there might not be an immediate concern for you.

But just like heat buildup in your attic, higher temperatures in your garage can have negative effects on the temperature in the rest of your home. Heat seeping into the house from the garage will cause your air conditioning system to work harder to keep it comfortable indoors. And that’s going to cost you money.

Getting the Heat Out

For all of these reasons, it’s a good idea to reduce the temperature in your garage as soon as possible. Of course, if you’re actively working in the garage or right outside, you can always leave the door open. This allows an influx of fresh, cooler air to clear it out.

But that’s not really a practical solution when you’re not immediately on hand. After all, you can’t leave your garage door open indefinitely and as soon as you close it, the heat will start to build right back up again.

Vents and Fans

One thing we don’t want to forget is that heat rises. That means installing a vent and fan in the roof where the hottest air will be can help remove the majority of the excess heat building up in your garage. Just like an attic fan, this fan can be triggered to come on when the temperature inside the garage reaches a certain point. Usually, the fan comes on when the indoor temperature reaches a point that is likely higher than outside – 90 degrees F or higher.

The fan then draws hot air out through your vent, reducing the temperature inside the garage to equalize the outdoor temperature. This will be effective in and of itself, but if you want even better results, you can also install another vent towards the bottom of your garage door. That way, as the hot air is pulled out of the top of the garage, fresh air will be drawn in through the vent, providing a constant stream of cooler, fresh air and promoting healthy circulation within your garage.

Tags:
Posted in Air Conditioning | Comments Off

The Beauty of Zone Heating

Friday, January 21st, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Tags: , , , , , , , , , , ,
Posted in Energy Savings | Comments Off

Attic Insulation – Does it Save You Money?

Wednesday, January 12th, 2011

While you may not spend too much time up in your attic in the winter – or at any time of year for that matter – the conditions up there can end up having a significant impact on the size of your heating bills. Fortunately, if you’re leaking heat out of your attic like crazy, there is something you can do about it. And it won’t even take you a lot of time or cost too much, but it will save you a ton of money in the long run.

So what is it that you can do to magically save so much on your heating bills? Well, the truth is that all you really need to do is insulate your attic properly. Since the attic isn’t typically a space that people occupy often, builders often leave these areas uninsulated. That means that they’re pretty cold in the winter. But if you’re not sitting up there, does it really make any difference?

Absolutely it does. The problem with having an uninsulated attic is that heat rises and so will quickly move to the highest point in your home. This is the attic, of course, and if the attic isn’t insulated, all of that warm air that you’ve been paying to heat will go right out the top of your house. Even if the door to the attic is shut up tight, you will still be losing heat into it.

And if the attic isn’t insulated, chances are that there’s no insulation anywhere above the ceiling of the top floor of your house. With heat continually rising and escaping out of the top of your home, you’ll find that your home heating system has to work much harder to keep the house at a comfortable temperature. And the harder your heating system works, the more you’re paying in energy bills each month.

Fortunately, adding insulation to your attic is relatively easy and won’t cost you much at all. And the savings you start to see immediately on your energy bills will more than make up for the expense of having the insulation installed. Even if your attic does have some insulation in place already, it may be worth checking to make sure it’s still working well. Some types of insulation simply break down over time and you might not be getting anywhere near the protection you thought you were.

Tags: , , , , , , ,
Posted in Energy Savings | Comments Off