Posts Tagged ‘Tsawwassen’

Water and Energy Saving Tips From Cultus Lake

Friday, September 30th, 2011

The cost of the heat, air conditioning and water supply to your Cultus Lake home continues to rise – it’s no wonder you want to cut your bills so much. But, how can you do that without cutting into the creature comforts and conveniences you’ve gotten used to over the course of the last few decades? Here are a few simple energy and water saving tips to make your life easier.

  • Patching Leaks – Two of the biggest wasters of water are dripping faucets and leaky pipes. The amount of water wasted by a single drip every second could provide for multiple baths per year – it adds up fast. Not only are leaky faucets and pipes easy to fix; they tend to develop into bigger problems as time passes.
  • Drains and Flushing – If you put a piece of toilet paper in the toilet used to clean an eye or wipe the counter, don’t flush. It’s a waste of water. If you notice some extra toothpaste in the sink, don’t rinse yet. You can always use the water from brushing your teeth or washing your face to clean it out. Multi-task and minimize how much water goes down the drain to save water.
  • Fully Loaded – A partially filled washing machine or dish washer is a huge waster of water. Fill it up and wait to run the device until it’s at the brim – the same amount of water is used no matter how much is in the device.
  • Lower Water Flow – Don’t crank your faucets up to the max just to get a glass of water or to check for hot water. It’s a waste of energy and it’s often unnecessary, especially when waiting for water to hit the right temperature.

If you’re interested in getting the most out of your home’s water supply, there are hundreds of little ways to save water that will add up over time. These are just some of the easiest ways to get started.

Tags: , , ,
Posted in Energy Savings | Comments Off

Is There REALLY Such a Thing as Plumbing Maintenance? A Tip From Hammond

Monday, September 12th, 2011

Because it is so specialized and can lead to big messes if handled improperly, plumbing is sometimes neglected among routine areas of maintenance in your Hammond home. This is a mistake, however, as there are some routine tasks that should be performed on plumbing systems, such as:

  • Remove rust, calcium and lime deposits from the water heater
  • Cleaning the aerators
  • Clearing drain lines
  • Sharpening disposal blades

Some of these are simpler than others, but for the most part, unless you are a very savvy homeowner, they should be done by a licensed plumber. Even if you are not up to doing your own plumbing work, there are still plenty of routine things you can do in order to detect potential problems and see if further work is needed.

In the Bathroom

  • Unscrew the showerhead and look for deposits of lime, calcium, rust and other minerals.
  • Run water down shower and tub drains for signs of slow drainage.
  • Inspect the shower/tub for cracked tiles, which can be signs of leakage beneath the surface.
  • Flush each toilet with the tank lid off to make sure they are flushing properly and all parts are working.
  • Examine all caulking for cracks, gaps or peeling.

In the Kitchen

  • Turn on the faucets. See if water leaks out of the knobs, handles or elsewhere.
  • Have leaky faucets fixed right away.
  • Look beneath the sink for signs of leakage from the exposed drain pipes.

Elsewhere around the House

  • Take a look at the flame and burner chamber of your water heater. A yellowed flame may mean the fuel jets need to be cleaned. Make sure the chamber is free of rust and other small debris.
  • Inspect the washing machines hoses for loose joints, cracking or holes.
  • Look for mold and mildew throughout.

Next Steps

If you find any troublesome issues during this inspection, it is time to call in a professional to get them fixed right away. Doing this simple walkthrough once to twice a year can help prevent plumbing disasters before they happen.

Tags: , , ,
Posted in Plumbing | Comments Off

How a Water Softener Works

Wednesday, July 20th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Tags: , , ,
Posted in Plumbing | Comments Off

Ultra Violet Lighting

Friday, July 8th, 2011

With a state of the art home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What is the COP and Why Is It Important?

Wednesday, June 29th, 2011

If you’ve been researching air conditioners, you’ve probably seen all sorts of numbers associated with each model. One of these numbers is the Coefficient of Performance (COP). While it’s good to gather as much data as you can before you make a purchasing decision, you also need to know what that data means if it’s going to help you make the best selection possible.

Measuring COP

Calculating the COP for any air conditioning model is relatively simple. The number you see displayed on the box is the ratio of energy input to cooling output. For the most part, the air conditioners you’re probably been looking at have a COP of between 2.5 and 4.0, although newer models are beginning to appear with COPs of up to 5.0.

The higher the COP, of course, the more efficient the air conditioner, so it makes sense to take this number into account when you’re making your purchase. You should also keep in mind, though, that the COP is not a constant measurement. The warmer it is outside, the lower your unit’s COP will be. However, this is standard across all units, so a relative COP comparison is still a viable evaluation method.

If you’re not sure what COP you should look for or whether a lower number will be effective for your home (especially if you only need to cool a small space), you should talk to a professional who can help you match the right COP level to your particular living space.

Improving Efficiency

While it’s always a good idea to get an air conditioner with the best energy efficiency ratings possible, that’s not the only thing you can do to reduce your energy usage and keep your cooling costs down. For instance, there are plenty of ways to keep your home naturally cooler without even turning on the air conditioner.

Even when you do need to flip it on, anything else you can do to reduce the indoor temperature will make it easier for your air conditioner to keep your house comfortable. So put up some awnings, run the ceiling fan and close the blinds to block out that harsh afternoon sun. The more you can do to reduce your indoor temperature naturally, the less your air conditioner will have to do, and the lower your cooling costs will be.

Tags: , , ,
Posted in Air Conditioning | Comments Off

What is a Whole House Fan?

Monday, June 20th, 2011

Cooling your home is a big deal. Especially if the temperature in your home is generally very high in the summer, the cost of air conditioning is tremendous. A central air conditioner can cost between $2,000 and $4,000 to run for an average 2,800 square foot home over the course of six months. That’s a lot of electricity just to stay cool.

That’s why a whole house fan is a great option for those that want to forego the use of direct air conditioning for at least part of the year.

What It Does

A whole house fan is different from a standard air conditioner because it doesn’t use a heat exchanger to remove heat from air before it enters your home. That heat exchanger is the culprit for a large percentage of an air conditioner’s energy consumption. A whole house fan can be used when the temperature outside is lower than inside, a common occurrence on moderate days in the summer.

The whole house fan draws air and then cycles it through your air vents without cooling it. The act of moving air through your home, however, is often enough to cool the space to a comfortable level. The size of your whole house fan depends on quite a few things. First, how big is your home? Large homes that require even cooling need a larger fan to draw in air. However, small homes can often get away with models that use as little as 120 Watts of electricity. That’s less than your computer uses.

Choosing a Fan for Your Home

Keep in mind that a whole house fan only works when the temperature outside is lower than inside. If the air outside is excessively humid or if it is very warm in the hottest months of summer, you will still need an air conditioning unit. But, even if you run your air conditioner for two months out of the year, you’ll save a tremendous amount of money in the other four months by operating a whole house fan.

Whole house fans should be used in conjunction with an effective air purification system to ensure all outdoor contaminants are effectively removed before they are cycled through your house. They also require the same level of maintenance and cleaning as a normal AC system. However, with the right care, they work wonders to cut down on your energy bill.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How Can I Prevent Clogged Drains?

Wednesday, June 8th, 2011

One of the most frustrating plumbing issues any home owner will encounter is a clogged drain. Not only are clogged drains a nuisance, they are largely avoidable, so it becomes that much more frustrating when it happens since you know that you could have taken preventative measures long before the problem occurred. To help stop your drains from clogging in the future, here are some useful preventative tips:

  • Set Cooking Grease Aside – Cooking grease is thick, viscous and clings to the sides of almost all types of pipes. So, instead of pouring it down your sink and hoping it clears out on its own, pour it into a coffee can and set it aside. There are a number of places where you can recycle old grease.
  • Flush Garbage Disposals – When you use your garbage disposal, it is imperative that you flush cold water through the system at the same time. Without water to flush the food particles through the pipes, anything ground up in the disposal will become stuck and with the application of grease or other food particles can easily become a thick clog.
  • Pour Boiling Hot Water Down the Pipes – At least once a week it is a good idea to pour 2-3 quarts of boiling water down your sinks and bathtub to loosen any pre-clogs that have formed. Things like soap, grease, food, and hair can all be dislodged by an application of hot water on a regular basis.
  • Taking Care with Your Toilet – A toilet is not designed to flush anything that will technically fit down the hole. Even for paper products that seem to be flushable, take care in what goes into the toilet bowl. Paper towels, garbage, and wrappers should not be flushed or they are likely to cause clogs.
  • Use Strainers – Install strainers on all of your sinks, including the ones in your bathroom. A simple strainer will catch excess bits of food, hair, and other grime that has a habit of falling down the drain and getting flushed along with the dishwater or during a shower.

With care, your drains will remain clog free and never require the services of a snake or a plumber. If you do get past the point of no return, do not panic just yet – there are a number of steps you can take to remove a small clog without chemicals or professional help. However, if the clog refuses to budge or begins to backup, know when to call a plumber.

Tags: , , , ,
Posted in Plumbing | Comments Off

Heat Pump Filter Care

Monday, April 4th, 2011

On the whole, heat pumps are efficient, durable and effective. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.

That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.

Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.

If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.

Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.

Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.

Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceeding.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

New Thermostats – Are they Worth the Investment?

Friday, February 4th, 2011

When you are trying to save money around the house, a new thermostat is definitely worth looking into. Sure, your old thermostat works fine. But there are a lot of features available on newer models that can help you save money on your heating and cooling costs throughout the year.

And you do not need to wait until it is time to replace your home comfort system to upgrade your thermostat. Most thermostats can work with many different types of heating and cooling systems. So no matter what type of HVAC system you have or how old it is, you should be able to integrate some type of new thermostat into it.

But how can a new thermostat save you money? Well, they simply offer a lot of features that you can use to your advantage. For instance, even the most basic programmable thermostat can let you set different temperatures for different times of day. You can program the thermostat to turn the heat down during the day when no one is home and then you can have the heat switch back on just before you get home.

That way, you can come home to a nice, warm house without having to pay to heat it all day long when it is empty. Many newer thermostats also are more accurate and can provide more pinpoint control of your heating and cooling system. That means that you will not be wasting money because your heating system gets the actual temperature in your house up to 75°F when you only really need it to hit 72°F.

Newer thermostats help you to save money in a variety of ways, and that savings will more than pay for the cost of having a new thermostat installed. That is because thermostats are actually quite cheap and easy to install. A relatively basic programmable thermostat should not run you more than $100, and even if you opt for one of the more advanced systems out there, you will not pay more than a few hundred dollars.

That is a small price to pay considering the increased comfort possible with a state of the art thermostat and the potential for savings every month on your heating or cooling bills. Plus, you likely paid a considerable amount to have that state of the art HVAC system put in. It is worth paying just a bit more so that you can get the most possible out of it.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off